Roland Stereo Amplifier CUBE 30X User Guide

Owner’s Manual  
Thank you, and congratulations on your choice of the Roland CUBE-30X Guitar Amplifier.  
Before using this unit, carefully read the sections entitled  
•IMPORTANT SAFETY INSTRUCTIONS (page 2)  
•USING THE UNIT SAFELY (page 3–5)  
•IMPORTANT NOTES (page 5)  
Additionally, in order to feel assured that you have gained a good grasp of every  
feature provided by your new unit, Owner’s manual should be read in its entirety.  
The manual should be saved and kept on hand as a convenient reference.  
Main Features  
• 30-watt output, high-performance, DSP guitar amp with built-in 25 cm (10-inch)  
speaker.  
• Offers nine different COSM amp types  
Amps included: JC CLEAN, ACOUSTIC, BLACK PANEL, BRITISH COMBO,  
TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK  
and DYNA AMP  
Composite Object Sound Modeling (COSM) is Roland’s innovative and powerful  
sound modeling technology. COSM analyzes the many factors that make up the  
original sound, such as the electrical and physical characteristics of the original,  
and then produces a digital model that can reproduce the same sound.  
• Channels can be switched between CLEAN and LEAD. Channel switching can be  
done via optional footswitch.  
• The CUBE-30X includes Roland’s Power Squeezer function. This feature enables  
you to reduce the maximum output from 30 watts to 2 watts at the press of a single  
button. When switched on, Power Squeezer reproduces the distortion of a fully-  
cranked power amp along with a great sound, regardless of the volume level, but  
with a 2-watt output that is easy to handle in the home.  
• A tuner function is also included. This feature allows you to tune your guitar  
while the instrument is connected to the CUBE-30X.  
• Includes easy-to-use, three-band equalizer (Bass/Middle/Treble).  
• Onboard EFX section includes 4 types of digital effect, chorus, flanger, phaser and  
tremolo; footswitch (optional) can be used to switch EFX on and off.  
• Separate “Delay” and “Reverb” effects provided in addition to the EFX.  
• Equipped with “RECORDING OUT jack” convenient for use in recording and for  
use as headphone out.  
• The unit is equipped with an external input jack, which is convenient for your  
practice sessions. Use this to play along with sounds from CD players and MP3  
players.  
Copyright © 2006 ROLAND CORPORATION  
All rights reserved. No part of this publication may be reproduced in any form without the  
written permission of ROLAND CORPORATION.  
 
USING THE UNIT SAFELY  
The  
symbol alerts the user to important instructions  
Used for instructions intended to alert  
the user to the risk of death or severe  
injury should the unit be used  
improperly.  
or warnings.The specific meaning of the symbol is  
determined by the design contained within the  
triangle. In the case of the symbol at left, it is used for  
general cautions, warnings, or alerts to danger.  
Used for instructions intended to alert  
the user to the risk of injury or material  
damage should the unit be used  
improperly.  
The  
symbol alerts the user to items that must never  
be carried out (are forbidden). The specific thing that  
must not be done is indicated by the design contained  
within the circle. In the case of the symbol at left, it  
means that the unit must never be disassembled.  
* Material damage refers to damage or  
other adverse effects caused with  
respect to the home and all its  
furnishings, as well to domestic  
animals or pets.  
The symbol alerts the user to things that must be  
carried out. The specific thing that must be done is  
indicated by the design contained within the circle. In  
the case of the symbol at left, it means that the power-  
cord plug must be unplugged from the outlet.  
001 Before using this unit, make sure to read the  
009 Do not excessively twist or bend the power cord,  
nor place heavy objects on it. Doing so can  
damage the cord, producing severed elements  
and short circuits. Damaged cords are fire and shock  
hazards!  
instructions below, and the Owner’s Manual.  
..........................................................................................................  
002a  
Do not open or perform any internal modifica-  
tions on the unit.  
..........................................................................................................  
..........................................................................................................  
010 This unit, either alone or in combination with an  
003 Do not attempt to repair the unit, or replace parts  
amplifier and headphones or speakers, may be  
capable of producing sound levels that could  
within it (except when this manual provides  
specific instructions directing you to do so). Refer  
all servicing to your retailer, the nearest Roland Service  
Center, or an authorized Roland distributor, as listed on  
the “Information” page.  
cause permanent hearing loss. Do not operate for a long  
period of time at a high volume level, or at a level that is  
uncomfortable. If you experience any hearing loss or  
ringing in the ears, you should immediately stop using  
the unit, and consult an audiologist.  
..........................................................................................................  
004 Never use or store the unit in places that are:  
..........................................................................................................  
• Subject to temperature extremes (e.g., direct  
sunlight in an enclosed vehicle, near a heating  
duct, on top of heat-generating equipment); or  
are  
011 Do not allow any objects (e.g., flammable  
material, coins, pins); or liquids of any kind  
(water, soft drinks, etc.) to penetrate the unit.  
• Damp (e.g., baths, washrooms, on wet floors); or are  
• Humid; or are  
..........................................................................................................  
012a  
• Exposed to rain; or are  
Immediately turn the power off, remove the  
power cord from the outlet, and request servicing  
by your retailer, the nearest Roland Service  
Center, or an authorized Roland distributor, as listed on  
the “Information” page when:  
• Dusty; or are  
• Subject to high levels of vibration.  
..........................................................................................................  
007 Make sure you always have the unit placed so it is  
• The power-supply cord, or the plug has been  
damaged; or  
level and sure to remain stable. Never place it on  
stands that could wobble, or on inclined surfaces.  
• If smoke or unusual odor occurs  
..........................................................................................................  
008a  
• Objects have fallen into, or liquid has been spilled onto  
the unit; or  
The unit should be connected to a power supply  
only of the type described in the operating  
instructions, or as marked on the unit.  
• The unit has been exposed to rain (or otherwise has  
become wet); or  
..........................................................................................................  
• The unit does not appear to operate normally or  
exhibits a marked change in performance.  
..........................................................................................................  
3
 
013 In households with small children, an adult  
Placement  
• Using the unit near power amplifiers (or other equipment  
should provide supervision until the child is  
capable of following all the rules essential for the  
safe operation of the unit.  
351  
containing large power transformers) may induce hum. To  
alleviate the problem, change the orientation of this unit;  
or move it farther away from the source of interference.  
..........................................................................................................  
014 Protect the unit from strong impact.  
352a  
• This device may interfere with radio and television reception.  
Do not use this device in the vicinity of such receivers.  
352b  
(Do not drop it!)  
• Noise may be produced if wireless communications devices,  
..........................................................................................................  
such as cell phones, are operated in the vicinity of this unit.  
Such noise could occur when receiving or initiating a call, or  
while conversing. Should you experience such problems,  
you should relocate such wireless devices so they are at a  
greater distance from this unit, or switch them off.  
015 Do not force the unit’s power-supply cord to  
share an outlet with an unreasonable number of  
other devices. Be especially careful when using  
extension cords—the total power used by all devices you  
have connected to the extension cord’s outlet must never  
exceed the power rating (watts/amperes) for the  
extension cord. Excessive loads can cause the insulation  
on the cord to heat up and eventually melt through.  
354b  
• Do not expose the unit to direct sunlight, place it near  
devices that radiate heat, leave it inside an enclosed  
vehicle, or otherwise subject it to temperature extremes.  
Also, do not allow lighting devices that normally are used  
while their light source is very close to the unit (such as a  
piano light), or powerful spotlights to shine upon the  
same area of the unit for extended periods of time.  
Excessive heat can deform or discolor the unit.  
..........................................................................................................  
016 Before using the unit in a foreign country, consult  
with your retailer, the nearest Roland Service  
Center, or an authorized Roland distributor, as  
listed on the “Information” page.  
355b  
• When moved from one location to another where the  
temperature and/or humidity is very different, water  
droplets (condensation) may form inside the unit. Damage  
or malfunction may result if you attempt to use the unit in  
this condition. Therefore, before using the unit, you must  
allow it to stand for several hours, until the condensation  
has completely evaporated.  
..........................................................................................................  
026 Do not put anything that contains water (e.g.,  
flower vases) on this unit. Also, avoid the use of  
insecticides, perfumes, alcohol, nail polish, spray  
cans, etc., near the unit. Swiftly wipe away any liquid that  
spills on the unit using a dry, soft cloth.  
356  
• Do not allow rubber, vinyl, or similar materials to remain  
on the unit for long periods of time. Such objects can  
discolor or otherwise harmfully affect the finish.  
..........................................................................................................  
359  
• Do not paste stickers, decals, or the like to this instrument.  
Peeling such matter off the instrument may damage the  
exterior finish.  
360  
• Depending on the material and temperature of the surface  
on which you place the unit, its rubber feet may discolor  
or mar the surface.  
You can place a piece of felt or cloth under the rubber feet  
to prevent this from happening. If you do so, please make  
sure that the unit will not slip or move accidentally.  
101a  
The unit should be located so that its location or  
position does not interfere with its proper ventilation.  
..........................................................................................................  
102a  
Always grasp only the plug on the power-supply cord  
when plugging into, or unplugging from an outlet.  
..........................................................................................................  
103a  
At regular intervals, you should unplug the  
power plug and clean it by using a dry cloth to  
wipe all dust and other accumulations away from  
its prongs. Also, disconnect the power plug from the  
power outlet whenever the unit is to remain unused for  
an extended period of time. Any accumulation of dust  
between the power plug and the power outlet can result  
in poor insulation and lead to fire.  
4
109a  
104 Try to prevent cords and cables from becoming  
Before cleaning the unit, turn off the power and  
unplug the power cord from the outlet.  
entangled. Also, all cords and cables should be  
placed so they are out of the reach of children.  
..........................................................................................................  
..........................................................................................................  
110a  
106  
Whenever you suspect the possibility of lightning  
in your area, pull the plug on the power cord out  
of the outlet.  
Never climb on top of, nor place heavy objects on the unit.  
..........................................................................................................  
..........................................................................................................  
119 The cooling vents on either side of the unit may  
107a  
Never handle the power cord or its plug with wet hands  
when plugging into, or unplugging from, an outlet.  
become hot, so take care to avoid burns.  
..........................................................................................................  
..........................................................................................................  
121 Do not remove the speaker grille and speaker by  
108a  
Before moving the unit, disconnect the power  
plug from the outlet, and pull out all cords from  
external devices.  
any means. Speaker not user replaceable. Shock  
hazardous voltages and currents are present  
inside the enclosure.  
..........................................................................................................  
IMPORTANT NOTES  
291b  
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2,  
3, 4 and 5, please read and observe the following:  
Power Supply  
Additional Precautions  
301  
• Do not connect this unit to same electrical outlet that is  
553Use a reasonable amount of care when using the unit’s  
buttons, sliders, or other controls; and when using its jacks  
and connectors. Rough handling can lead to malfunctions.  
being used by an electrical appliance that is controlled by an  
inverter (such as a refrigerator, washing machine,  
microwave oven, or air conditioner), or that contains a  
motor. Depending on the way in which the electrical  
appliance is used, power supply noise may cause this unit  
to malfunction or may produce audible noise. If it is not  
practical to use a separate electrical outlet, connect a power  
556When connecting / disconnecting all cables, grasp the  
connector itself—never pull on the cable. This way you  
will avoid causing shorts, or damage to the cable’s  
internal elements.  
supply noise filter between this unit and the electrical outlet.  
557  
307  
• A small amount of heat will radiate from the unit during  
normal operation.  
558a  
• Before connecting this unit to other devices, turn off the  
power to all units. This will help prevent malfunctions  
and/or damage to speakers or other devices.  
• To avoid disturbing your neighbors, try to keep the unit’s  
308  
volume at reasonable levels. You may prefer to use  
headphones, so you do not need to be concerned about  
those around you (especially when it is late at night).  
• Although the LEDs are switched off when the POWER  
switch is switched off, this does not mean that the unit has  
been completely disconnected from the source of power. If  
you need to turn off the power completely, first turn off  
the POWER switch, then unplug the power cord from the  
power outlet. For this reason, the outlet into which you  
choose to connect the power cord’s plug should be one  
that is within easy reach and readily accessible.  
559a  
• When you need to transport the unit, package it in the box  
(including padding) that it came in, if possible. Otherwise,  
you will need to use equivalent packaging materials.  
562  
• Use a cable from Roland to make the connection. If using  
some other make of connection cable, please note the  
following precautions.  
Maintenance  
401a  
• Some connection cables contain resistors. Do not use  
cables that incorporate resistors for connecting to this  
unit. The use of such cables can cause the sound level  
to be extremely low, or impossible to hear. For infor-  
mation on cable specifications, contact the manufac-  
turer of the cable.  
• For everyday cleaning wipe the unit with a soft, dry cloth  
or one that has been slightly dampened with water. To  
remove stubborn dirt, use a cloth impregnated with a  
mild, non-abrasive detergent. Afterwards, be sure to wipe  
the unit thoroughly with a soft, dry cloth.  
402  
• Never use benzine, thinners, alcohol or solvents of any kind,  
Wrap the power cord around the cord hook when trans-  
porting or storing the unit.  
to avoid the possibility of discoloration and/or deformation.  
5
 
 
Panel descriptions  
Control Panel  
fig.01-01  
Panel descriptions  
*
All product names mentioned in this document are trademarks  
or registered trademarks of their respective owners, and are not  
related to Roland Corporation.  
In this manual, these names are used as appropriate ways to  
indicate sounds that are simulated using COSM technology.  
PHASER  
This effect adds a variable  
phaseshifted signal to the direct  
sound, giving the sound a swirling  
character.  
6. GAIN Knob  
TREMOLO  
Tremolo is an effect that creates a  
Adjusts the LEAD channel’s distortion level.  
cyclic change in volume.  
7. VOLUME Knob  
Adjusts the LEAD channel volume.  
EQUALIZER  
8. BASS Knob  
Adjusts the tone quality of the lower range.  
12. DELAY/REVERB Knob  
Turn this knob to DELAY or REVERB to switch to that  
effect.Turn the knob to adjust the amount of effect  
applied.  
9. MIDDLE Knob  
Adjusts the tone quality of the midrange.  
10.TREBLE Knob  
*
Graduations for DELAY, REVERB on a panel are for  
reference.  
Adjusts the tone quality of the upper range.  
*
Because COSM faithfully models the special features and  
characteristics of a variety of amplifiers; no sound will be  
produced when BASS, MIDDLE, and TREBLE knob are all  
set to 0 while the Type switch is set to BLACK PANEL or  
TWEED.  
Be sure to check the sound as you adjust the effects.  
DELAY  
Turn the knob to change the time  
and amount of delay effects.  
EFX (Effects)  
REVERB  
Turn the knob to adjust the reverb  
level.  
11.EFX (Effects) Knob  
Turn this knob to chorus, flanger, phaser, or tremolo to  
select the corresponding effect. Turn the knob to adjust  
the amount of effect applied.  
The ON indicator lights up when EFX is turned on, and  
goes out when EFX is turned off. You can also turn EFX  
on and off using optional footswitches (BOSS FS-5U or  
FS-6).  
13.POWER SQUEEZER Switch  
The switch lights in red when the power squeezer  
function is on; the switch is unlit when the power  
squeezer is off.  
*
Graduations for CHORUS, FLANGER, PHASER, TREMOLO  
on a panel are for reference. Be sure to check the sound as you  
adjust the effects.  
Switching on the Power Squeezer function allows you to  
reduce the amp’s output to 2 watts.  
CHORUS  
Switching this on allows you to produce a sound that  
preserves the same tone and balance as when the amp is  
played at maximum volume, but at an output of 2 watts,  
for volume levels that are more suitable for the average  
home.  
In this effect, a slightly detuned  
sound is added to the original  
sound, giving the sound greater  
breadth and fullness.  
*
The Power Squeezer function affects only sounds input  
through the INPUT jack. It has no effect on sounds input via  
the AUX IN jack.  
FLANGER  
This creates a flanging effect that  
creates a sort of spinning sensation  
with the sound.  
7
 
Panel descriptions  
14.AUX IN Jack  
TUNING  
You can use “manual tuning,” whereby you switch to each  
individual string to tune it separately, and “chromatic  
tuning,” which automatically determines the closest pitch to  
that played by the string.  
You can connect a CD player, MP3 player or other kind  
of device and have it play along with your guitar.  
This accepts a stereo miniature phone plug. However,  
the speaker and RECORDING OUT/PHONES output is  
monaural.  
*
Determine the volume level by adjusting the volume control of  
the connected device.  
Tuning in “Manual Mode”  
1. Press the TUNER switch.  
15.FOOT SW (Footswitch) Jack  
2. Use the Type switch to select the name of the string you  
You can use footswitches (optional BOSS FS-5U or FS-6)  
connected using a connection cable (optional Roland  
PCS-31) to switch channels (JC CLEAN/LEAD), and to  
turn EFX on and off.  
want to tune, then play a single note on the open string.  
*
No sound is played through the unit’s speaker while the tuner  
function is in use.  
PCS-31  
white  
red  
EFX  
SELECT  
Polarity Switch  
*
Reference Pitch: A4=440 Hz  
*
When you connect only one footswitch by mono cable, you can  
only use it to switch channels (JC CLEAN/LEAD).  
3. Tune the string until the green indicator lights.  
<The Pitch is flat>  
<The Pitch is flat, but almost in tune>  
16.RECORDING OUT/PHONES Jack  
When Using RECORDING OUT  
Use mono 1/4” phone plugs when  
connecting to this jack.  
*
When the pitch is even  
lower, the indicator flashes.  
Volume level of RECORDING  
OUT can be easily adjusted if you  
set the CLEAN or LEAD channel  
VOLUME as shown in the diagram  
on the right.  
<The Pitch is correct>  
When Using Headphones  
Connect headphones to this jack.  
<The Pitch is sharp, but almost in tune>  
<The Pitch is sharp>  
*
No sound is played through the unit’s speaker while the  
RECORDING OUT/PHONES jack is in use.  
17.POWER Switch  
This switches the power on and off.  
*
When the pitch is even  
higher, the indicator flashes.  
*
This unit is equipped with a protection circuit. A brief interval  
(a few seconds) after power up is required before the unit will  
operate normally.  
Tuning in “Chromatic Mode”  
1. Hold down the TUNER switch for at least one second  
so that the red indicator flashes.  
*
If you need to turn off the power completely, first turn off the  
POWER switch, then unplug the power cord from the power  
outlet. Refer to “Power Supply” (p. 5).  
2. Play a single note on the open string you want to tune.  
3. Tune the string until the green indicator lights.  
8
 
 
Connections  
Refer to the figure shown below to connect the CUBE-30X to other equipment.  
fig.01-02  
945  
Switching the Power On and Off  
Once the connections have been completed, turn on power to  
your various devices in the order specified. By turning on  
devices in the wrong order, you risk causing malfunction  
and/or damage to speakers and other devices.  
*
If you need to turn off the power completely, first turn off the  
POWER switch, then unplug the power cord from the power  
outlet. Refer to “Power Supply” (p. 5).  
921  
*
To prevent malfunction and/or damage to speakers or other  
devices, always turn down the volume, and turn off the power  
on all devices before making any connections.  
1. Make sure that all volume controls on the CUBE-30X  
and connected devices are set to 0.  
2. Turn on all the devices connected to the CUBE-30X ’s  
*
Before making the connections, be sure that the volume setting  
input jacks (INPUT jack and AUX IN jack).  
of the VOLUME knob for both amplifiers is set to “0.”  
926a  
3. Turn on the CUBE-30X.  
4. Switch on any equipment connected to the CUBE-30X’s  
*
When connection cables with resistors are used, the volume  
level of equipment connected to the inputs may be low. If this  
happens, use connection cables that do not contain resistors,  
such as those from the Roland PCS series.  
RECORDING OUT/PHONES jack.  
5. Adjust the volume levels for the devices.  
6. Before switching off the power, lower the volume on each of  
the devices in your system and then TURN OFF the devices  
in the reverse order to which they were switched on.  
*
This unit is equipped with a protection circuit. A brief interval  
(a few seconds) after power up is required before the unit will  
operate normally. For protection from sudden big sound,  
always make sure to have the volume level turned down before  
switching on power. Even with the volume all the way down,  
you may still hear some sound when the power is switched on  
and off, but this is normal, and does not indicate a malfunction.  
9
Sample Settings  
Alternative Metal  
The perfect sound for heavy, sharp riffs.  
Select the high-gain R-FIER amp, then use the equalizer to  
boost the low end even more.  
Used with a humbucking pickup in the rear position, it  
results in an extreme distortion effect.  
Plus, you can add a long delay to use this as a lead sound  
with great sustain.  
Adding a short delay produces a doubling sound like that  
from two performers playing the same phrases  
simultaneously.  
SELECT : LEAD  
Space Clean  
This is a transparent sound using spacial effects.  
Select the JC CLEAN amp, modeled on the Roland JC-120,  
then add chorus and long delay.  
Using this setting with a guitar equipped with single coil  
pickups makes great sounding arpeggios and chord  
strumming.  
Depending on the phrase being played, it can be effective  
to set the delay sound’s delay time slightly slower than the  
phrase’s tempo.  
Classic Rock  
This is a 70s-style rock sound.  
Turning up the gain produces a powerful rock sound in all  
riffs and solos.  
A powerful low end is a characteristic of the sound emitted  
by the surfaces of the cabinet, so you can turn up the  
equalizer knobs, especially the BASS knob, and increase to  
produce a sound with great punch.  
Turning down the GAIN knob is also a perfect way to get a  
sharp crunch sound.  
Dynamic Style  
DYNA AMP is an original amp that uses relative picking  
strength to create changes in distortion depth.  
First, adjust the GAIN knob so that a clean tone is obtained  
with soft picking and deep distortion is obtained when you  
pick hard.  
Now, mixing arpeggios played with a gentle touch along  
with firmly picked chords and solos results in a guitar  
sound with huge dynamics.  
Now, to create a broader, more open sound, cut the  
midrange and raise the low end.  
Using this in combination with the EFX and delay and  
reverb creates a sound with an even greater feeling of scale.  
10  
Main Specifications  
Power Consumption  
CUBE-30X  
34 W  
Rated Power Output  
Dimensions  
30 W  
385 (W) x 240 (D) x 380 (H) mm  
15-3/16 (W) x 9-1/2 (D) x 15 (H) inches  
Nominal Input Level  
INPUT (JC CLEAN channel): -10 dBu/1 MΩ  
Weight  
AUX IN: -10 dBu  
9.3 kg / 20 lbs 9 oz  
Speakers  
Accessories  
25 cm (10 inch)  
Owner’s Manual  
Controls  
Options  
POWER Switch  
SELECT Switch  
TUNER Switch  
Footswitch: FS-5L (BOSS)  
FS-6 (BOSS)  
POWER SQUEEZER Switch  
Connection Cable: PCS-31  
<JC CLEAN Channel>  
VOLUME Knob  
*
0 dBu = 0.775 Vrms  
<LEAD Channel>  
TYPE Switch (ACOUSTIC, BLACK PANEL, BRIT  
COMBO, TWEED, CLASSIC STACK, METAL  
STACK, R-FIER STACK)  
In the interest of product improvement, the  
specifications and/or appearance of this unit are subject  
to change without prior notice.  
GAIN Knob  
VOLUME Knob  
<EQUALIZER>  
BASS Knob  
MIDDLE Knob  
TREBLE Knob  
<EFX>  
EFX Knob (CHORUS, FLANGER, PHASER, TREMOLO)  
<DELAY/REVERB>  
DELAY/REVERB Knob  
Indicators  
JC CLEAN Channel  
LEAD Channel  
EFX  
TUNER  
POWER SQUEEZER  
Connectors  
INPUT Jack  
AUX IN Jack  
FOOT SW Jack (SELECT, EFX)  
RECORDING OUT/PHONES Jack  
wer Supply  
, AC 230 V or AC 240 V  
11  
For EU Countries  
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.  
For the USA  
FEDERAL COMMUNICATIONS COMMISSION  
RADIO FREQUENCY INTERFERENCE STATEMENT  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause undesired operation.  
Unauthorized changes or modification to this system can void the users authority to operate this equipment.  
This equipment requires shielded interface cables in order to meet FCC class B Limit.  
For Canada  
NOTICE  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
AVIS  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.  
SD000903  
 
1*DH  

Pyramid Technologies Home Theater System SE703EX User Guide
Raritan Computer Switch MCC16 MCC4R User Guide
Reebok Fitness Treadmill RCTL097070 User Guide
Renesas Power Supply HD74LV1G14A User Guide
RIDGID Saw AC99402 User Guide
RocketFish Corded Headset RF GPS31201 User Guide
Rosewill Computer Keyboard RK 9000 User Guide
Samsung MP3 Player YH 820 User Guide
Samsung Stereo Receiver C560S User Guide
Saturn Automobile 2005 Relay User Guide