Rotel Universal Remote RR 939 User Guide

AUD  
SAT  
CD  
TV  
TAPE  
VCR  
AUX  
CBL  
POWER  
VOL  
CH  
BAND  
MUTE  
T / V  
SURROUND +  
GUIDE  
ON SCREEN  
MENU  
PAUSE  
C. DELAY  
TRACK –  
TRACK +  
DOWN  
PLAY  
SEL  
UP  
STOP  
DYNAMIC  
PRE  
CH  
RECALL  
OPN/CLS  
SUR-DELAY  
MOVIE FILT  
PROG  
1
DISC 1  
2
DISC 2  
3
DISC 3  
4
DISC 4  
5
DISC 5  
6
DISC 6  
5.1 CH  
TIME [REVIEW]  
7
8
0
9
SELECT  
CLEAR [SCAN]  
10  
ENTER  
BACK  
>10  
RANDOM [REPEAT]  
PHONO/ LD  
CD  
TUNER  
AUX 1  
AUX 2  
TAPE 1  
M 1  
TAPE 2 VIDEO 1 VIDEO 2 VIDEO 3  
M 4  
M 2  
M 3  
[SHIFT]  
LIGHT  
RR-939  
RR-939  
Remote Control  
Owner’s Manual  
 
REMOTE CONTROL RR-939  
RR-939  
Once the programming is complete, you select a compo-  
nent with the press of a button and turn the RR-939 into  
the remote control for your Rotel CD player or your Sony  
TV set or your Panasonic video recorder. Then, you simply  
press command buttons that duplicate the functions on  
the remote that came with your component.  
To operate the RR-939:  
Step One: Press a DEVICE button to activate the com-  
mands for the desired component. This command set will  
remain active until you press a different DEVICE button.  
Step Two: Press COMMAND buttons to operate the com-  
To get started, look at the layout of the RR-939 and the fol-  
lowing operating instructions:  
ponent you have selected.  
Remember that the COMMAND buttons duplicate many  
controls on many different types of audio/video compo-  
nents and their function may vary depending on the type  
of component selected. For example, the PLAY/SELECT  
button engages the play mode on a CD Player, but it dupli-  
cates the SELECT function on a cable TV converter.  
1
Device Buttons  
Eight buttons at the top of the RR-939 determine which set  
of commands is currently active. For example, if you press  
the AUDIO button (labeled AUD), the RR-939 becomes the  
remote control for your Rotel Surround Sound Processor.  
If you press the TV button, the RR-939 becomes the re-  
mote control for your TV set.  
Note: The RR-939 tells you which command set is active.  
Each time you press a COMMAND button, the active DE-  
VICE key blinks red to tell you which component you are  
controlling. If the COMMAND button that you press has  
no function in the active command set (for example, the  
numeric keys in VCR mode), no DEVICE button will blink,  
indicating that the COMMAND button is inactive.  
These buttons are also used in programming the RR-939.  
See the PROGRAMMING section below for details.  
2
Command Buttons  
This large group of buttons duplicates the functions on  
the remote controls for your audio/video components. A  
general description of these functions follows. Detailed  
information on the specific function of each button can be  
found in the CONTROL COMMANDS tables at the back of  
this manual.  
The COMMAND buttons are labelled, often with multiple  
labels if the button serves different purposes for different  
kinds of components. As long as you remember that  
pressing a DEVICE button turns the RR-939 into, for ex-  
ample, a CD player remote control or a VCR remote con-  
trol, the functions of each button should be intuitive.  
Tables listing the function of each button for each type of  
component can be found in the back of this manual.  
At the top of this group of buttons are basic controls such  
as Power, Volume, Channel Selection, etc.  
Below these is a group of buttons that duplicate the  
transport functions on a tape recorder or VCR (Stop, Play,  
Pause, etc.) as well as the Up and Down commands that  
might be found on a cable or satellite TV receiver.  
A few buttons have a second function, activated by  
pressing and releasing the SHIFT button before pressing  
the COMMAND button, as described below.  
3
Macro Buttons  
The next group of buttons duplicates the numeric keypad  
buttons such as might be used for direct track selection  
on a CD Player or direct channel selection on a TV set.  
Included in this section are special command buttons  
providing functions found on various components.  
A macro is a series of individual commands triggered by  
pressing one button. Macros make operating a complex  
home entertainment system much easier. For example,  
think of playing a videotape: You turn on the TV, turn on  
the VCR, select the TV input connected to the VCR, and,  
finally, put the VCR into Play mode. That’s four separate  
commands — and it may take you as many as six pushes  
on various buttons to execute them. A macro makes this  
simpler by executing all the needed commands with just  
one push of a button.  
At the bottom of this group of buttons are ten round  
source selection buttons labelled CD, TUNER, TAPE, etc.  
These duplicate the source input selection buttons on a  
receiver, preamplifier, or surround sound processor. The  
function of these buttons is not the same as the DEVICE  
buttons at the top of the remote control. The DEVICE but-  
tons determine which command set is active on the  
RR-939. The source select COMMAND buttons switch in-  
puts on the audio/video component being controlled.  
There are five MACRO buttons on the RR-939 – the four  
buttons labeled M1, M2, M3, and M4, along with the  
POWER button. A sequence of up to eight different com-  
3
4
 
REMOTE CONTROL RR-939  
RR-939  
mands can be memorized to be replayed automatically  
with the press of a MACRO button. See the section, PRO-  
GRAMMING MACROS, for more detailed information.  
The easiest way to proceed is to find your components  
and corresponding three-digit codes from the list of  
codes at the end of this manual. If your component is not  
listed, there is an alternative auto-search method for find-  
ing the right command set.  
Note: Macro buttons are available only in the AUD, SAT,  
and CBL modes. However, you can include switching to a  
different DEVICE mode as part of a macro, in order to op-  
erate other components.  
Three Digit Code Programming  
Find your audio/video component in the list at the end of  
this manual and note the 3-digit code(s):  
To replay a MACRO, first activate one of the DEVICE  
modes (AUD, SAT, and CBL only). Then, press the desired  
MACRO button. If a macro has been programmed for that  
button, the RR-939 will replay the memorized sequence of  
commands and the DEVICE button will blink red for each  
command. If no macro has been programmed, or if mac-  
ros are not available in that DEVICE mode, nothing will  
happen and no DEVICE buttons will blink.  
Step One: Turn on the component you wish to memorize.  
Step Two: Press the corresponding DEVICE button (for ex-  
ample, if you are memorizing the command set for a CD  
player, press the CD DEVICE button at the top of the  
RR-939). While pressing the DEVICE button, simulta-  
neously press the MUTE button and hold both for at least  
one second. The DEVICE key will light in red for 20 sec-  
onds, indicating that you have entered the program mode.  
The next step must be done within this 20 second period,  
or the RR-939 will revert to its standard operating mode.  
4
Special Buttons  
There are two special function buttons at the bottom of  
the RR-939 remote.  
Step Three: Point the RR-939 at the audio/video compo-  
nent and enter the 3-digit code, using the numeric but-  
tons. The DEVICE key will flash each time you enter a  
digit. If you have entered the correct code, the compo-  
nent will turn off. If there is more than one 3-digit code for  
your brand of source component, continue entering addi-  
tional 3-digit codes from the list until the component turns  
off, indicating that you have found the right one.  
The LIGHT button turns on backlighting so you can see  
the buttons in a dark room. The lights stay on for 7 sec-  
onds and will stay on for an additional 7 seconds each  
time another button is pressed.  
The SHIFT button activates additional commands for  
some buttons. These functions are shown in italics on the  
illustrations and in the command tables at the back of this  
manual. To activate one of these commands, press and  
release the SHIFT button and then press the desired  
COMMAND button.  
Step Four: Store the code number by pressing the corre-  
sponding DEVICE button again. The button will blink twice  
to confirm the storage of the code in memory.  
Step Five: Test the COMMAND buttons, using the tables  
at the back of this manual as a reference for the available  
functions. If the functions do not work correctly, repeat  
the above steps, with the next available 3-digit code from  
the list for your brand of component.  
Programming  
The RR-939 can replace up to ten different remote con-  
trols, one for each of the eight DEVICE buttons. Before  
you use it, you must program the RR-939, i.e. tell it which  
audio/video components you wish it to control.  
Repeat the steps above for each of up to eight compo-  
nents, assigning each one to the appropriate DEVICE key.  
The RR-939 contains hundreds of command sets for vari-  
ous A/V components. Programming the remote involves  
selecting the command sets that correspond to the com-  
ponents in your system, and assigning them to the eight  
DEVICE buttons by entering a three digit code. This need  
only be done once during initial set-up of the RR-939.  
5
6
 
REMOTE CONTROL RR-939  
RR-939  
Auto-Search Programming  
Macro Programming  
If the code table does not provide a 3-digit code or if none  
of the code numbers assigned to your brand of compo-  
nent work, use the following auto-search method to find a  
code number that will operate your components.  
There are five MACRO buttons – the four labeled M1, M2,  
M3, and M4 plus the POWER button. When the RR-939 is  
in the AUDIO, SAT, or CABLE mode, the macro buttons  
can store and replay a sequence of up to 8 commands.  
Step One: Turn on the component you wish to operate.  
Step Two: Press the corresponding DEVICE button and  
the MUTE button, simultaneously for one second or more.  
The LED will light for 20 seconds.  
To memorize a macro sequence:  
Step One: Press a DEVICE button (AUD, SAT, or CBL only)  
and the MUTE button simultaneously for at least one sec-  
ond. The DEVICE button will light red for 20 seconds.  
Step Three: Press and hold the CH UP or CH DOWN but-  
ton. This sends a succession of Power ON/OFF code sig-  
nals that are stored in memory. Stop pressing the CH  
button as soon as the component turns off, signifying that  
you have found a code set that operates that component.  
Step Two: Press the MACRO button you wish to program.  
Step Three: Press a sequence of commands (up to 8) that  
you wish to store. Pressing a DEVICE button to change  
modes during the sequence counts as one command.  
Step Four: Press the DEVICE button to store the code set  
you have found. The button will blink twice to confirm that  
you have stored the code.  
Step Four: Press the CH UP button to store the macro se-  
quence. The DEVICE button will blink twice to confirm.  
Step Five: Test the remote control functions. If any do not  
work properly, repeat the preceding steps until you find  
the right code.  
Note: Because the POWER button can be used as a  
MACRO button, the normal Power On/Off commands are  
temporarily stored on the MUTE button during the macro  
learning sequence. To include a power on/off command in  
a macro, simply press the MUTE button.  
Displaying a Code Number  
To find out which 3-digit code is currently stored on a DE-  
VICE button:  
To erase a previously stored macro sequence, follow the  
above steps, skipping Step 3 without entering any com-  
mands, i.e. memorize a blank macro.  
Step One: Press the DEVICE button and the MUTE button  
simultaneously for one second or more. The DEVICE but-  
ton will light red for 20 seconds.  
Step Two: Press the RECALL button. The DEVICE button  
will blink a number of times, indicating the first digit in the  
code, followed by a one second interval with the light off,  
followed by a number of blinks indicating the second digit,  
followed by another interval, followed by blinks indicating  
the third digit. For example, one blink, three blinks, and  
eight blinks, with one second intervals in between, repre-  
sents the 3-digit code number 138.  
Volume Punch Through  
It may be desirable to have the AUDIO or TV volume com-  
mands available at all times. For example, when using the  
RR-939 to control your CD player, you might want the VOL-  
UME buttons (which would normally be inactive in CD  
mode) to change the volume of your preamp or surround  
sound processor. This feature, called Volume Punch  
Through, can be used to make the volume commands  
from either the AUDIO or TV device mode available in  
other device modes.  
Note: The number ZERO in a 3-digit code is represented  
by 10 blinks.  
7
8
 
REMOTE CONTROL RR-939  
RR-939  
To set-up the Volume Punch Through feature:  
3-Digit Code List  
Step One: Press the DEVICE button (the device you wish  
to transfer the volume function to) and the MUTE button  
simultaneously for at least one second.  
Audio Codes  
TAPE Codes  
Rotel RSP975  
Rotel RTC975  
Rotel RSX965  
Rotel RA985  
Rotel RC995  
Rotel RC972  
Rotel RSP985  
Rotel RSP980  
Rotel RTC970  
Rotel RT940  
Rotel RTC940  
Rotel RTC950  
Rotel RX950  
Rotel RMZ955  
001  
001  
001  
001  
001  
001  
002  
002  
002  
002  
003  
003  
003  
004  
Rotel RD960  
Rotel RMZ955  
Denon  
Pioneer  
Pioneer (LD)  
Yamaha  
001  
003  
011 012  
004 007 008  
002  
Step Two: Press the VOLUME UP button.  
Step Three: Press the AUDIO or TV DEVICE button (the  
device you wish to transfer the volume function from).  
The DEVICE button will blink twice to confirm.  
005 006 009  
DVD Codes  
Denon  
LG  
001  
Example: To have the AUDIO volume command prevail in  
the VCR mode, press the VCR DEVICE button in Step One  
and the AUDIO DEVICE button in Step 3.  
010  
002  
003  
004  
005  
006  
011  
007  
008  
009  
Mitsubishi  
Panasonic  
Pioneer  
Proscan  
RCA  
Samsung  
Sony  
Toshiba  
Yamaha  
CD Codes  
Rotel RCD931  
Rotel RCD951  
Rotel RCD971  
Rotel RCD991  
Rotel RCD950  
Rotel RCC945  
Rotel RCC955  
Rotel RCD970  
Rotel RCD975  
Rotel RCD855  
Rotel RCD865  
Rotel RCD955  
Rotel RCD965  
Rotel RCD945  
Rotel RCC935  
Rotel RCC940  
Rotel RCD990  
Rotel RMZ955  
001  
001  
001  
001  
001  
001  
001  
002  
002  
002  
002  
002  
002  
002  
003  
003  
004  
005  
Mapping a Component to  
Another Device Button  
SAT Codes  
GE  
001  
007  
006  
011 012  
003  
013  
002 005  
001  
004  
008  
In some systems, you may need to program one command  
set to another DEVICE button. For example, if you have  
two CD players, you may wish to use the SAT DEVICE but-  
ton to store and activate commands for a second CD  
player. To reassign device codes to another button:  
Alphastar  
Echostar  
Hitachi  
Hughes  
Panasonic  
Primestar  
RCA  
Sony  
Toshiba  
Uniden  
Step One: Press the new DEVICE button where you wish  
to store the command set and the MUTE button simulta-  
neously for at least one second.  
009 010  
CABLE Codes  
Step Two: Press the DEVICE button corresponding to the  
command set you wish to transfer in order to access the  
command sets for that type of component.  
Pioneer  
Americast  
Jerrold  
001 002 003  
005  
006 007  
Scientific-Atlanta004  
Step Three: Enter the 3-digit code for the audio/video  
component you wish to transfer.  
Tocom  
Zenith  
010  
008 009  
Step Four: Press the DEVICE button where you wish to  
store the command set. It will blink twice to confirm.  
Example: To store CD commands on the SAT DEVICE but-  
ton, press the SAT DEVICE button in Steps One and Four.  
Press the CD DEVICE button in Step Two.  
9
10  
 
REMOTE CONTROL RR-939  
RR-939  
Memorex  
Metz  
MGA  
Minerva  
Mitsubishi  
004 007 072  
088  
001 004 024 042  
088  
004 024 040 042  
109 146  
001 004 062 101  
015 025  
001 019 024 040  
056 130 134  
043  
043  
043  
019 081  
034 056 080 164  
001 003 004 024  
056 059 060 063  
064 127 143 164  
001 003 004 005  
038 059 093 164  
180 181 182 183  
184 185 186 187  
188 189 190 192  
004 018 023 025  
135 176  
004 143  
144 160 161 167  
004 058 143 171  
173  
034 056  
004 019 047 127  
143  
001 004 023 024  
056 065 074 144  
152 156 160 161  
007 019 047  
072 169  
001 004 058  
004 101 127 133  
143 160  
007 020 021 033  
053 057 082  
004 028 043 048  
143  
004 007 015 028  
030 057 082 094  
143 160  
004 014 019 022  
028 143 175  
TMK  
Toshiba  
004  
MGA  
Minolta  
Mitsubishi  
045 046 059  
004 020  
004 020 046 051  
059 061 142  
034 040  
024 034  
012 023 043 048  
043  
053 054  
070 133 140  
004 020 031 063  
031 034 067  
031 034 054 067  
101 162 166 167  
168 169 170 171  
101  
004 021 048  
108  
072  
014  
004 020 034 040  
041 107 109 140  
144 147  
001 008 010 014  
031 034 040 053  
054 101  
058  
072  
014  
017 040 107 109  
113 115 124  
043 048 135  
001 007 010 014  
040 134  
017 037 129 131  
001 004 008 009  
010 014 017 020  
081 101  
031 054  
024  
001 009 031 052  
056 057 058  
034  
TV Codes  
015 030 040 062  
101  
143  
A Mark  
Admiral  
Akai  
Ampro  
Anam  
112  
Totevision  
Universal  
Video Concepts 146  
Vidikron  
Vidtech  
Wards  
072 081 161  
001 146  
073 167  
043 054 055 056  
080 104 108 112  
118 121  
001 004 058 112  
001 002 003 004  
058  
043  
001 002 003 004  
101 143  
043  
004  
043 051  
143  
054  
143  
008 009  
MTC  
Multitech  
NEC  
Nordmende  
Optonica  
Panasonic  
Pentax  
MTC  
NAD  
NEC  
174  
004  
004 008 009 019  
028 060 061 063  
064 072 074 164  
004  
004  
AOC  
Nikei  
Onking  
Onwa  
Optonica  
Panasonic  
Philco  
Candle  
Capehart  
Cetronic  
Citizen  
Yamaha  
York  
Yupiteru  
Zenith  
Zonda  
Philco  
Philips  
043  
072 073 095 103  
112  
Pilot  
Classic  
Concerto  
Contec  
Coronado  
Craig  
Crown  
Curtis Mathes  
CXC  
Pioneer  
Portland  
Pulsar  
Quartz  
RCA  
VCR Codes  
Philips  
Aiwa  
Akai  
034  
043 046 124 142  
146  
072  
001 004 101 143  
043  
004 055 103 111  
114 127 143  
004 143  
043  
062  
Ampro  
Anam  
Pioneer  
Realistic  
031 103  
Daewoo  
Audio Dynamics 012 023 043  
Broksonic  
Canon  
Capehart  
Craig  
Curtis Mathes  
Daewoo  
Portland  
Proscan  
Proton  
035 037 129  
028 031  
108  
001 040 135  
031 041  
007 010 017 065  
108 111  
Daytron  
Dynasty  
Dynatech  
Electrohome  
Emerson  
Ricoh  
Runco  
Salora  
Samsung  
024 143  
Quasar  
Radio Shack  
001 004 005 028  
043 047 048 051  
096 143 151 153  
154 155  
007 057  
028 043  
043  
004 008 009 034  
056 073 074 091  
130 144 155 160  
161  
004 106 110 112  
113 119 127 143  
203 204 205 207  
209  
004  
004 007 010 011  
012 023 075 143  
158 163  
164  
129  
164  
001  
Sansui  
Sanyo  
RCA  
Daytron  
DBX  
Dynatech  
Electrohome  
Emerson  
108  
Fisher  
Funai  
Futuretech  
GE  
012 023 043  
034 053  
059  
006 017 025 027  
029 031 034 035  
036 037 046 101  
129 131 138 153  
001 008 009 010  
034  
031 063 072 107  
109 144 147  
Scott  
Sears  
Realistic  
Runco  
Sampo  
Samsung  
Sharp  
Shintom  
Sony  
Sanyo  
Scott  
Sears  
Goldstar  
Grundig  
Fisher  
Funai  
GE  
Soundesign  
STS  
Sylvania  
Symphonic  
Tandy  
004  
031 034 059 067  
034  
010 034  
043  
034 043  
031 070  
031 034 101  
034  
177 178  
006  
Hallmark  
Hitachi  
Go Video  
Goldstar  
Harman Kardon 012 045  
132 136  
004 012 020 101  
Sharp  
Tatung  
Teac  
Hitachi  
018 026 034 043  
063 137 150  
031  
031  
004 012 040 101  
043  
012 031 043 048  
055 060 130 150  
152  
014 034 048  
034  
001 004 009 017  
034  
Infinity  
Inkel  
JBL  
JCP  
JCPenny  
Signature  
Sony  
Soundesign  
Spectricon  
SSS  
072  
Technics  
Teknika  
Thomas  
Thomson  
TMK  
070 085 126 139  
003 004 028 043  
112  
004 043  
002  
001 003 059 060  
063 064 127 160  
164  
052  
081  
056 062  
034 080  
004  
002 003 004 024  
028 043 072 101  
143  
Instant Replay  
JCL  
JCPenny  
Jensen  
JVC  
004 008 024 030  
065 101 143 160  
013  
034 038 070 083  
001 070  
002 059  
043 143 154  
072  
Supre Macy  
Sylvania  
Jensen  
JVC  
Kenwood  
Kloss  
KTV  
Lodgenet  
Logik  
Toshiba  
004 008 017 059  
082 131  
040 101  
040  
Totevision  
Unitech  
Vector Research 012  
Victor 048  
Video Concepts 012 034 046 141  
Kenwood  
Lloyd  
LXI  
Symphonics  
Tandy  
Tatung  
Technics  
Techwood  
Teknika  
072  
004  
Magin  
Magnavox  
040  
Luxman  
LXI  
Videosonic  
Wards  
040  
031 034 041 067  
068  
012 031 067 069  
101  
027 030  
031  
001 010 014 031  
034 040 053 072  
101 134 139  
007 015 052 081  
160 164  
001 003 004 022  
059 060 061 063  
064 127 164  
001 164  
164  
001 004 017 024  
031 034 040 053  
054 131  
012 034 043  
034 048 056 058  
072 080 101  
Marantz  
Marta  
Matsui  
MEI  
Magnavox  
Telerent  
Tera  
Thomson  
072  
172  
Yamaha  
Zenith  
Marantz  
Matsui  
194 195 196 197  
198 199 200 201  
Memorex  
11  
12  
 
REMOTE CONTROL RR-939  
RR-939  
Note: [SHIFT] button functions shown in italics  
Rotel Control Commands  
Remote  
Control  
Button  
RTC975/RSP975  
RSX965/RA985  
RC995/972  
RSP985  
RTC940/950  
Remote  
Control  
Button  
RMZ955  
RCD991/971  
RCD950/951/931  
RCC945/955  
CD 001  
RCD975/970/965  
RCD955/945  
RSP980  
RT940/RTC970  
AUDIO 002  
Power  
Volume +  
Volume –  
Mute  
AUDIO 001  
Power  
Volume +  
Volume –  
Mute  
AUDIO 003  
Power  
Volume +  
Volume –  
Mute  
AUDIO 004  
Standby  
Volume +  
Volume –  
Mute  
CD 002  
POWER  
VOL+  
VOL –  
MUTE  
PLAY  
STOP  
SEARCH –  
SEARCH +  
PAUSE  
RECALL  
GUIDE  
MENU  
PRE CH  
T/V  
CH +  
CH –  
O
1
2
3
4
5
POWER  
VOL+  
VOL –  
MUTE  
PLAY  
STOP  
SEARCH –  
SEARCH +  
PAUSE  
RECALL  
GUIDE  
MENU  
PRE CH  
T/V  
CH +  
CH –  
O
1
2
3
4
5
Play  
Stop  
Play  
Stop  
Search –  
Play  
Stop  
Search –  
Search +  
Pause  
Dynamic  
+
Rewind  
Fast Forward Search +  
Pause  
C. Delay  
Recall  
Surround + Surround +  
On Screen  
Sur. Delay  
Band  
Tuning +  
Tuning –  
O
1
2
3
4
5
6
7
8
9
Up  
Open/Close  
Track –  
Track +  
Track –  
Track +  
Menu  
Down  
Band  
Tuning +  
Tuning –  
O
1
2
3
4
5
6
7
8
9
Band  
Tuning +  
Tuning –  
Fav. Station  
Preset +  
Preset –  
10  
A – B  
0
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
1 [Disc 1]  
2 [Disc 2]  
3 [Disc 3]  
4 [Disc 4]  
5 [Disc 5]  
6 [Disc 6]  
7
6
7
8
9
6
7
8
9
8
9
10  
10  
Plus 8  
10  
Plus 10  
ENTER  
MOVIE FILT  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
Out. Balance Enter  
Movie Filter  
5.1 Channel 5.1 Channel *  
Input Select Center Focus  
ENTER  
MOVIE FILT  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
Disc Select Disc Select  
Program Program  
Time [Review] Time [Review]  
Clear [Scan] Clear [Scan]  
Random [Rep] Random [Rep]  
Select  
Back  
Tuner  
CD  
Bal. Check  
Tuner  
CD  
Back  
Tuner  
CD  
Tuner  
CD  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
SHIFT  
M1  
Tape 1  
Tape 2  
Phono/Ld  
Video 1  
Video 2  
Video 3  
Aux 1  
Tape Monitor Tape 1  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
[SHIFT]  
M1  
Tape/SAT  
Tape 2  
Phono/LD  
Video 1  
Video 2  
Video 3  
Aux 1  
Tape 2  
Video/CD  
X
Aux 1  
Aux 2  
Aux 2  
M2  
M2  
M3  
M3  
M4  
M4  
DEVICE  
DEVICE  
* RTC970 requires [Shift] function for 5.1 CH input  
13  
14  
 
REMOTE CONTROL RR-939  
RR-939  
Note: [SHIFT] button functions shown in italics  
Rotel Control Commands  
Remote  
Control  
Button  
RCC935  
RCC940  
RCD990  
RMZ955  
Remote  
Control  
Button  
RD960  
Pioneer LD  
RMZ955  
CD 003  
CD 004  
CD 005  
TAPE 001  
TAPE 002  
TAPE 003  
POWER  
VOL+  
VOL –  
MUTE  
PLAY  
STOP  
SEARCH –  
SEARCH +  
PAUSE  
RECALL  
GUIDE  
MENU  
PRE CH  
T/V  
POWER  
VOL+  
VOL –  
MUTE  
PLAY  
STOP  
SEARCH –  
SEARCH +  
PAUSE  
RECALL  
GUIDE  
MENU  
PRE CH  
T/V  
Power  
Power  
Play  
Stop  
Search –  
Search +  
Pause  
Play  
Stop  
Play  
Stop  
Skip –  
Play  
Stop  
Rewind  
Play  
Stop  
Rewind  
Play  
Stop  
Rewind  
Search –  
Search +  
Pause  
Open/Close  
Track –  
Track +  
Fast Forward Fast Forward Fast Forward  
Pause  
Record  
Pause  
Open/Close  
Track –  
Track +  
CH +  
CH –  
CH +  
CH –  
Skip +  
Skip –  
O
1
2
3
4
5
6
7
0
0
1
2
3
4
5
6
7
8
9
O
1
2
3
4
5
6
7
1 [Disc 1]  
2 [Disc 2]  
3 [Disc 3]  
4 [Disc 4]  
5 [Disc 5]  
6 [  
7
8
9
8
9
8
9
10  
10  
ENTER  
MOVIE FILT Program  
Disc Select  
ENTER  
MOVIE FILT  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
Program  
Disc  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
Time [Review] Time [Review]  
Clear [Scan]  
Random [Rep] Random [Rep] Random  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
[SHIFT]  
M1  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
[SHIFT]  
M1  
M2  
M2  
M3  
M3  
M4  
M4  
15  
16  
 
REMOTE CONTROL RR-939  
RR-939  
Note: [SHIFT] button functions shown in italics  
Other Control Commands  
Remote  
Control  
Button  
Remote  
Control  
Button  
TV  
VCR  
CABLE  
DVD  
SAT  
POWER  
VOL+  
VOL –  
MUTE  
Power  
Volume +  
Volume –  
Mute  
Power  
Power  
Volume +  
Volume –  
Mute  
POWER  
VOL+  
VOL –  
MUTE  
Power  
Volume +  
Volume –  
Mute  
Power  
Volume +  
Volume –  
Mute  
PLAY  
STOP  
SEARCH –  
SEARCH +  
Select  
Down  
Left  
Right  
Play  
Stop  
Select  
Down  
Left  
PLAY  
STOP  
SEARCH –  
SEARCH +  
Play  
Stop  
Search –  
Search +  
Pause  
Select  
Down  
Left  
Right  
Up  
Rewind  
Fast Forward Right  
Pause  
PAUSE  
Up  
Up  
PAUSE  
RECALL  
Clear/Std.  
Record  
Exit  
RECALL  
Open/Close Exit  
GUIDE  
MENU  
PRE CH  
Display/Rec.  
Menu  
Prev. Channel  
Guide  
Menu  
Prev. Channel  
GUIDE  
MENU  
PRE CH  
Guide  
Menu  
Return  
Guide  
Menu  
Prev. Channel  
T/V  
TV/VCR  
TV/VCR  
Switch  
T/V  
Switch  
CH +  
CH –  
Channel +  
Channel –  
Channel +  
Channel –  
Channel +  
Channel –  
CH +  
CH –  
Skip +  
Skip –  
Channel +  
Channel –  
O
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
O
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
8
9
Up  
Left  
Right  
Down  
8
9
8
9
8
9
10  
ENTER  
Pay Per View  
Enter  
10  
ENTER  
Enter  
Enter  
Enter  
MOVIE FILT Sleep Timer  
Fav. Station  
Info  
MOVIE FILT Sub. On/Off Fav. Station  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
[SHIFT]  
M1  
5.1 CH  
SELECT  
BACK  
TUNER  
CD  
Display  
Clear  
Info  
Next  
Alt  
Bypass  
Music  
Page +  
Day +  
Day –  
Page –  
TAPE 1  
TAPE 2  
PHONO/LD  
VIDEO 1  
VIDEO 2  
VIDEO 3  
AUX 1  
AUX 2  
[SHIFT]  
M1  
M2  
M2  
M3  
M3  
M4  
M4  
17  
18  
 
RR-939  
REMOTE CONTROL  
The Rotel Co., Ltd.  
10-10 Shinsen-Cho  
Shibuya-Ku  
Tokyo 150-0045  
Japan  
Phone: +81-3-5458-5325  
Fax: +81-3-5458-5310  
Rotel of America  
54 Concord Street  
North Reading, MA 01864-2699  
USA  
Phone: 978-664-3820  
Fax: 978-664-4109  
Rotel Europe  
Meadow Road  
Worthing, West Sussex BN11 2RX  
England  
Phone: +44 (0)1903 524 813  
Fax: +44 (0)1903 524 831  
Rotel Deutschland  
Kleine Heide 12  
D-33790 Halle/Westf.  
Germany  
Phone: 05201-87170  
Fax: 05201-73370  
082 OMRR-939 071298  
 

Radica Games Handheld Game System I7008 User Guide
Radio Shack Cordless Telephone 43 3544 User Guide
Raymarine Water Pump FA 2E User Guide
RIDGID Thermometer IR 100 User Guide
Roberts Radio Portable Radio R761 User Guide
Samsung Cell Phone 4G LTE SMARTPHONE User Guide
Samsung Home Theater System AH68 01959S User Guide
Saturn Automobile 2005 L Series User Guide
Sears CRT Television 2744279839 User Guide
Sears Refrigerator RS263B User Guide