Russell Hobbs Cookware RHEC1 User Guide

Single Cavity Electric Cooker  
Instruction Manual  
Model number: RHEC1  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit  
 
Safety Instructions  
Please comply with these instructions. If you do not, any damage resulting from  
improper, incorrect or negligent use or improper connection or installation is not  
covered by the manufacturer’s guarantee.  
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult  
a qualified electrician. Products must be installed in accordance with the  
manufacturer's safety recommendations.  
This appliance must only be used for the purpose of heating or cooking food, any other  
use, for example heating rooms, working surface or storage surface is dangerous and  
will void the manufacturer’s guarantee.  
Additions or modifications to the appliance are not permitted.  
Do not place or store flammable liquids, highly inflammable materials or fusible objects  
on or near the appliance.  
Small children must be kept away from the appliance.  
The electrical safety of this cooker is guaranteed only if it is connected to a properly  
earthed system, which complies with the electrical safety standards.  
Before changing the oven’s lamp, disconnect the appliance from the power supply.  
Do not put pressure on the power supply cable while fitting the cooker.  
Power supply cable length should not exceed 2m for isolation safety.  
If the power supply cord is damaged, it must be replaced by the manufacturer, it’s  
service agent or similar qualified persons in order to avoid damage.  
Repairs to the appliance must only be carried out by authorised service personal.  
Make sure all the packaging has been removed before you use the appliance.  
Cables from electrical appliances must not touch the hot surface of the appliance or hot  
cookware.  
Be careful when using small household appliances, such as irons, near the elements.  
Do not use the hotplates with empty cookware or without cookware.  
Make sure all the controls are in the off position when not in use.  
Some parts of the appliance may hold heat for a long time, you are required to wait for  
it cool before touching or cleaning any areas are exposed to the heat directly.  
For cleaning, the appliance must be switched off and cooled down.  
For safety reasons, the cleaning of the appliance with steam jet or high pressure  
cleaning equipment is not permitted.  
During use the appliance will get hot, you must take care not to touch the elements  
inside the oven cavity  
During grill mode the oven door should be closed.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
3
 
Safety Instructions  
Use only stable flat-based pans.  
This appliance is not intended for use by persons (including children) with reduced  
physical, sensory or mental capabilities, or lack of experience and knowledge, unless  
they have been given supervision or instruction concerning use of the appliance by a  
person responsible for their safety.  
Children should be supervised to ensure that they do not play with the appliance.  
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent  
or similarly qualified persons in order to avoid a hazard.  
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass  
or oven cavity as they can scratch the surface which may result in scratches or shattering  
of the glass.  
WARNING:  
In order to avoid a hazard due to inadvertent resetting of the thermal cut out. This  
appliance must not be supplied through an external device, such as a timer, or connected  
to a circuit that is frequently switched on and off.  
WARNING:  
Accessible parts may become hot during use. Young children should be kept away.  
Important note  
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult a  
qualified electrician. Products must be installed in accordance with the manufacturer's  
safety recommendations.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
4
 
Before using the appliance  
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult  
a qualified electrician. Products must be installed in accordance with the  
manufacturer's safety recommendations.  
This appliance must only be used for its intended purpose, domestic cooking. Any  
other form of usage is to be considered as inappropriate, dangerous and will void the  
manufacturer’s guarantee  
The manufacturer declines all responsibility in the event of damage caused by  
improper or incorrect use or installation of the appliance.  
Before installation, check that all parts listed below are present. If any parts are  
missing, please contact the product care service team on 0845 208 8750.  
Oven tray  
Wire grid  
Grill pan & handle set  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
5
 
Before using the appliance  
Note  
The drawings in the book may vary from your cooker model. They are designed to show  
the different features of all models covered by this book. Your model may not include all  
features.  
List of components  
1. Cooker top  
2. Control panel  
3. Oven door handle  
4. Adjustable feet  
5. Oven door  
6. Oven tray  
7. Wire grid  
8. Grill pan & handle set  
9. Oven lamp  
10. Hotplate  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
6
 
Installation  
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult a  
qualified electrician. Products must be installed in accordance with the manufacturer's  
safety recommendations, in accordance to the instructions in this guide and in  
compliance with the current regulations. Failure to do so will void the manufacturer’s  
guarantee.  
Before connecting your appliance to the mains at home, make sure to check the  
conformity of the voltage settings. These are specified on the information sticker  
attached to the appliance and/or packaging, with the usage conditions.  
The laws, ordinances, directives and standards in force in the country of use are to be  
followed (safety regulations, proper recycling in accordance with the regulations, etc.)  
After removing the packaging material from the appliance and its accessories, ensure  
that the hob is not damaged. If you suspect any damage, do not use the appliance and  
contact an authorised service personal, qualified electrician or Product Care, (0845 208  
8750), immediately.  
Environment where the appliance is to be installed  
To install the cooker correctly, the following precautions must be taken:  
The appliance can be installed directly next to kitchen/furniture units/cabinets that are  
not higher or taller than the top of the cooker’s hob.  
If the Kitchen units/cabinets that will be next to the cooker are higher or taller than the  
cooker, then they must be at least 200mm from edge of cooker’s hob.  
If a cooker hood is installed above the cooker, it must be a minimum distance of 650mm  
above the top of the cooker. The hood itself must be installed in accordance to the  
instructions/requirements of the cooker hood.  
Wall cabinets that are adjacent to a cooker hood must be a minimum distance of  
420mm from the cooker’s hob.  
If the cooker is installed beneath a wall cabinet, then the wall cabinet must be at least a  
minimum distance of 700mm away from the cooker’s hob.  
The cut-out or space required for the cooker is shown in the below image.  
7
 
Installation  
The distance between the rear edge of the hob and any adjacent wall is dependent on the  
wall surface.  
The cooker must not be placed next to or near a refrigerator.  
Easily combustible material like curtains, paper, clothes, etc. should not be located near the  
hob.  
Kitchen cabinets/units or other furniture that is close/near to the cooker must be heat  
resistant to more than 50°ͨC.  
The appliance must be installed direct on the floor and not on a base.  
Installation of the appliance  
The earth cable must connected to the terminal.  
You must ensure the insulated cable is connected to the power source during the  
connection of the cable. If there isn’t an appropriate earthed electrical outlet, (in  
accordance with the regulations of where the appliance is being installed), immediately  
contact a qualified professional.  
The earthed electrical outlet must be close to the appliance, (an extension cannot be  
used).  
The power cable must not touch any hot surface of the product. It must not touch the  
back part of the appliance or it could be damaged, this may cause the product to short  
circuit and stop working.  
If the power cable is damaged, do not use the appliance and contact an authorised  
service personal, qualified electrician or Product Care, (0845 208 8750), immediately.  
The wrong electric connection may damage your appliance and such damage is not  
cover by the manufacturer and will void the guarantee.  
The appliance is rated as 230-240 volts.  
The manufacturer bears no responsibility or liability for damages or losses caused from  
incorrect installation of the appliance.  
The appliance has been produced for a fixed connection to the power supply.  
For a fixed connection use H05VV, H05V2V2 or H05RR type supply cord.  
For a fixed connection use 3x2,5mm2 or 3x4mm2 sized cable according to appliance  
power and terminal box label.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
8
 
Installation  
Adjustment of the feet  
The cooker must be switched off before the feet are adjusted or the product moved.  
The product has 4 adjustable feet  
When the product is placed where it is to be used, check if the product is balanced. If it  
isn’t, you can adjust any of the feet by turning them clockwise.  
It is possible to raise the appliance by a maximum of 300mm by the adjustable feet.  
If the feet are adjusted do not move the appliance by dragging it. It must be moved by it  
being lifted by 2 or more persons.  
General warnings and measures  
Your appliance is produced in accordance with the related security, regulation and  
standards associated with the appliance.  
The maintenance and repair must be carried out by a qualified electrician or  
professional. If they are not then the manufacturer’s guarantee will be made void and  
the appliance could become unsafe.  
The outside surfaces of the appliance will heat up while it is in operation.  
The outside surfaces of the appliance will hold some heat even after the appliance has  
been turned off do not touch any hot surface and keep children away from the  
appliance.  
The interior surfaces of the oven will heat up and will hold the heat even after the  
appliance has been turned off - do not touch any hot surface and keep children away  
from the appliance.  
The cooker should not be left unattended while cooking solid or liquid oils. The may  
catch fire when heated to very high temperatures.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
9
 
Installation  
Never pour water on the flames of a fire that has been started from any oils, cover the  
cookware with its lid or cover to choke the fire. Turn off the cooker and contact the  
emergency services immediately.  
The cooker’s clock must be set and the oven and temperature dials must be adjusted  
otherwise the oven does not operate.  
Do not leave anything on the oven door when it is open or the appliance may become  
unbalanced. The door may also break.  
Unplug or switch of the appliance when it is not in use for long periods of time.  
Unplug or switch of the appliance before cleaning it.  
Protect your appliance against atmospheric conditions do not leave it to the affects of  
the sun, rain, snow, etc.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
10  
 
How to use  
Control panel  
Hotplates  
Each hotplate dial has 6 heat levels:  
0
1
Off  
Keep warm  
2 & 3  
4,5 & 6  
Low heat  
Cooking, roasting & boiling  
To turn on a required hotplate turn the appropriate dial in a clockwise direction to the  
necessary heating level. To turn off a required cooking zone turn the appropriate dial in an  
anti-clockwise direction to the 0 mark.  
Important note  
The surface of the hotplate(s) will still be hot/warm even when it has been turned off  
and will be for some time after.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
11  
 
How to use  
The top part of the hotplates are coated/covered by a protective heat resistant material.  
Turn the dial(s) of a hotplate or hotplates to 3 and leave on for 5 minutes in order to burn  
off an toughen the protective layer before using with cookware.  
Cookware with rough bottoms should not be used since these can scratch the ceramic  
glass surface. The bottom of the good cookware should be as thick and as flat as  
possible.  
Before using any cookware with hob, make sure that the bottoms of the cookware are  
clean and dry.  
Always place the cookware on the cooking zone before it is switched on. If possible,  
always place the lids on the cookware, (this will ensure energy is not wasted).  
The bottom of cookware must not be smaller or larger than the cooking zones, they  
should of the correct size as indicated below, (this will ensure energy is not wasted).  
You must ensure that when you have finished using the hotplates that they are turned  
off, (in the 0 position).  
Important note  
The surface of the hotplate(s) will still be hot/warm even when it has been turned off  
and will be for some time after  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
12  
 
How to use  
Oven & Grill  
Oven & Grill function switch  
This switch allows you to select oven and grill functions. The explanation of each function  
is detailed below and detailed instructions of each function on the following pages:  
Oven lamp will start operating  
Oven’s upper and lower heating elements start operating  
Oven’s lower heating element start operating  
Oven’s upper heating element start operating  
Oven’s grill heating element start operating  
Oven’s upper heating element and the grill heating elements start operating  
Important note  
The oven can not be operated when the timer is in the ‘0’ position and no temperature is  
selected on the thermostat dial.  
Important note  
You have to adjust the thermostat switch to get the required temperature for cooking, as  
well as having to adjust the timer dial to the required time or the ‘M’ position, (the oven  
can be used continuously when the timer dial is in the ‘M’ position).  
13  
 
How to use  
Important note  
The oven can not be operated when the timer is in the ‘0’ position and no temperature is  
selected on the thermostat dial.  
Important note  
With all the below functions you have to adjust the thermostat switch to get the  
required temperature for cooking, as well as having to adjust the timer dial to the  
required time or the ‘M’ position, (the oven can be used continuously when the timer  
dial is in the ‘M’ position).  
Upper and lower heating element function (static cooking)  
This function is defined as the traditional method of cooking, the heat is spread  
equally from the lower and upper heating elements in the oven. This ensures  
that the top and bottom of the oven is heated equally so food is cooked evenly.  
It is recommended to pre-heat the oven for 10 minutes before putting your in it,  
as this enables the oven to be reach the required temperature before the food is  
put in. Once the oven is preheated put you food inside the oven and close the  
door.  
This function should be used to cook meats, lasagnes, pizzas, cakes, etc.  
When your food is cooked, turn the oven and grill dial to the off position, along  
with the temperature and timer dials. Remove the food from the oven, (use  
appropriate heat resistant oven gloves), and put in a safe place. Leave the oven  
door open to ensure that the oven completely cools down. As the oven will be  
hot for a period of time after it has been switched off keep children away from  
the oven.  
Lower heating element function  
The heat is spread from the lower heating element and this function should be  
used for heating food instead of cooking it  
Upper heating element function  
The heat is spread from the upper heating element and this function should be  
used for heat or grill the side of food that is already cooked. It can also be used to  
heat food.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
14  
 
How to use  
Grill function  
This function is used to grill.  
Pre-heat the grill for 5 minutes, then place the food on the grill pan and then  
place this on the shelf at the highest level.  
When your food is cooked, turn the oven and grill dial to the off position, along  
with the temperature and timer dials. Remove the food from the oven, (use  
appropriate heat resistant oven gloves), and put in a safe place. Leave the oven  
door open to ensure that the oven completely cools down. As the oven will be  
hot for a period of time after it has been switched off keep children away from  
the oven.  
Upper heating element and grill function  
This function is used to grill rapidly.  
Pre-heat the grill for 5 minutes, then place the food on the grill pan and then  
place this on the shelf at the highest level.  
When your food is cooked, turn the oven and grill dial to the off position, along  
with the temperature and timer dials. Remove the food from the oven, (use  
appropriate heat resistant oven gloves), and put in a safe place. Leave the oven  
door open to ensure that the oven completely cools down. As the oven will be  
hot for a period of time after it has been switched off keep children away from  
the oven.  
Important note  
Maximum setting of the thermostat is 190°C  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
15  
 
How to use  
Mechanical timer  
Manual operation - when timer dial is turned to the ‘M’ position, (illustrated in the picture  
below), the oven can be used continuously when the timer dial is in the ‘M’ position). The  
oven can never be operated when the timer is in the ‘0’ position and no temperature is  
selected on the thermostat dial.  
Operation with the timer set - turn the timer dial in a clockwise direction in order to set  
the time between 0 100 minutes, (illustrated in the image below). When the adjusted  
time ends, the oven is turned of and a warning sound is heard.  
Energy saving  
The bottom of cookware should be as thick and as flat as possible.  
Choose cookware of the correct size.  
Using a lid with cookware will reduce cooking times.  
Minimise the amount of liquid or fat used to reduce cooking times.  
When liquid starts boiling, reduce the temperature setting.  
The oven should not be opened frequently during cooking.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
16  
 
How to use  
Oven accessories  
Oven tray  
Wire grid  
Grill pan & handle set  
Is to be used for stews and Is to be used to place  
Is to be used for grilling.  
roasts.  
different cookware's on it.  
It has a detachable handle  
and you must ensure it is  
centralised and secure  
before lifting or removing  
from the oven.  
It can be located in any  
rack  
It can be located in any  
rack.  
Do not leave the handle in  
position while grilling as it  
will become very hot.  
To locate the wire grid correctly in the cavity, put it on any rack and push it to the end.  
The pan anti-tilting wire must be place on the inside/back of the cavity  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
17  
 
How to use  
Accessories used in the oven  
You can use glass dishes, cake moulds, special oven trays and silicon bake ware that  
adhere to the require standards and regulations appropriate to the country of use.  
All glass dishes, cake moulds, special oven trays and silicon bake ware that used with the  
cooker must be placed in the middle of wire tray.  
Roasting dishes/trays can when used in the oven can change shape/form during  
cooking, however the dish/tray will return to is original form when it has cooled. This is  
normal occurrence during heat transfer.  
Do not put hot trays/dishes that are made from metal or glass in cold water or a cold  
environment immediately after cooking. As the dish or tray could become warped and  
the glass could shatter. They should be placed on a cooling rack or kitchen/dish cloth to  
ensure they cool down slowly.  
If you use the grill function of the oven, it is recommended that you use the grill pan  
that is supplied with the product. As the oils and fats that spatter and flow from the  
food are collected and do not dirty the inside of the oven.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
18  
 
Maintenance  
Hotplate cleaning  
Before cleaning the oven should be unplugged or turned off at the plug and cool.  
Wipe the hob with a suitable washing up liquid and a clean damp cloth.  
To dry the hob rub the appliance using a clean dry cloth.  
If aluminium foil or plastic items have accidentally melted on the hob surface, they  
should be immediately removed from the hot cooking area with a scraper. This will  
avoid any possible damage to the surface. This also applies to sugar or food containing  
sugar that may have been spilt on the hob.  
If any other food or liquid has been spilt on the hob surface, remove the dirt when the  
appliance has cooled down.  
Do not use a dishcloth or abrasive sponge to clean the hotplate/hob surface. These  
materials may damage the surface.  
Do not use chemical detergents, sprays or stain removers on the hotplate/hob. These  
materials may cause fire or hotplate/hob fade. Clean with water and washing up liquid.  
Oven cleaning  
Before cleaning the oven should be unplugged or turned off at the plug and cool.  
Check whether the cleaning materials you are going to use are appropriate and  
recommended by the manufacturer, as they may cause damage to the surfaces.  
Do not use caustic creams, abrasive cleaning powders, thick wire wool or hard tools.  
If any other food or liquid has been spilt on the oven surface, remove the dirt when the  
appliance has cooled down.  
Wipe the oven with a suitable washing up liquid and a clean damp cloth.  
To dry the oven rub the appliance using a clean dry cloth.  
Changing the oven lamp  
The changing of the oven lamp must be done by an qualified electrician or professional.  
The rating of the lamp should be 230V, 25Watt, Type E14, T300. Before changing the lamp  
the oven should be unplugged or turned off at the plug and cool.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit us at  
19  
 
Trouble shooting  
Electric oven and hobs must be connected to an electrical cooker powerpoint - consult  
a qualified electrician. Products must be installed in accordance with the  
manufacturer's safety recommendations.  
All repairs must be carried out by an authorised service personal or a qualified  
electrician.  
If the cooker does not operate The cooker may be unplugged or switch off at the plug  
socket or there has been a power failure and the fuse box/switch needs to be checked.  
If the oven does not heat the temperature dial may not have been adjusted.  
If the interior light does not light the bulb needs to be replaced.  
If the lower and upper heating elements do not cook equally check the shelf locations,  
the cooking time and the heat valves.  
If you still have any problem with your product, please call Product Care on 0845 208  
8750 or a qualified electrician.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit  
20  
 
Transportation  
If you think you will need to transport the cooker at any point you must keep the  
original packaging and only transport the product fully packaged.  
Follow the transport signs on the packaging and tape the loose cooker parts to the  
surfaces of the cooker.  
Place paper between the upper cover and cooking panel, cover the upper cover and  
then tape it to the side surfaces of the cooker.  
Tape cardboard or paper onto the front cover on the interior glass of the oven, as it  
could be damaged by wire grill or trays during transportation.  
Tape the oven door to the side panels of the cooker.  
If you do not have the original packaging, prepare a cardboard box that fits over the  
appliance to protect the external surfaces of the cooker during transportation.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit  
21  
 
Specification  
Model  
RHEC1  
Dimension (cm)  
(H)90.0 X (W)50.0 X (D)60.0  
Hotplate features  
Ø145mm hotplate (W)  
1000  
1500  
Ø180mm hotplate (W)  
Ø145mm rapid hotplate (W)  
Ø180mm rapid hotplate (W)  
Hotplate operation indicator light  
1500  
2000  
Standard  
Oven features  
Oven type  
Electric  
Oven volume (without fan) (lt)  
Cavity dimensions (without fan) (mm)  
Oven light (25W)  
52.5  
(H)330 x (W)370 x (D)430  
Yes  
Standard  
6
Easy to clean Enamel  
Electric oven functions  
Top heating element (W)  
Bottom heating element (W)  
Thermostat  
1000  
1000  
Standard  
1600  
Electric single grill (W)  
Electric double grill (W)  
Mechanical timer  
2600  
Yes  
Oven tray  
1
Grill pan & handle  
1
Wire grid  
1
Full outer glass & inner metal door (small glass) oven door  
Removable oven door  
Thermostat operation indicator light  
Oven operation indicator light  
Standard  
Standard  
Standard  
Standard  
Others  
Maximum total power (depends on model) (kW)  
Voltage (V)  
8,6  
230/ 400V 3N~  
0.79  
Energy consumption according to the EN50304 standards (depends on model) (kW)  
Electric cooker energy rating  
RoHS compliance  
A
Standard  
Standard  
106  
CE compliance  
Depth with door open (cm)  
22  
 
Spare parts  
Spare part  
Contact details  
Oven tray  
Available at www.productcareuk.com or  
call 0845 208 8750  
Wire grid  
Available at www.productcareuk.com or  
call 0845 208 8750  
Grill pan & handle set  
Available at www.productcareuk.com or  
call 0845 208 8750  
Dial  
Available at www.productcareuk.com or  
call 0845 208 8750  
Other  
Available at www.productcareuk.com or  
call 0845 208 8750  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit  
23  
 
For Customer Services & Spare Parts  
please call  
0845 208 8750  
Opening times: Monday - Friday  
8am 6pm & Saturday 9am 1pm  
or visit us at  
Revision 1  
This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is  
marked on a product/batteries, it means that the product/batteries should not be  
disposed of with your general household waste. Only discard electrical/electronic/battery  
items in separate collection schemes, which cater for the recovery and recycling of  
materials contained within. Your co-operation is vital to make sure the success of these  
schemes and for the protection of the environment. For your nearest disposal facility, visit  
www.recycle-more.co.uk or ask in store for details.  
We reserve the right due to possible changes to design to alter the instruction manual  
without prior notice.  
For Customer Services & Spare Parts please call 0845 208 8750  
Opening times: Monday - Friday 8am 6pm & Saturday 9am 1pm or visit  
 

RCA Flat Panel Television LED24C45RQ User Guide
Roberts Radio Clock Radio CRD 19 User Guide
Roland Electronic Keyboard GR 500 User Guide
Roland Recording Equipment UA 25 EX User Guide
Rotel Stereo Amplifier RA970BX User Guide
RoyalTek GPS Receiver RCD 3000 User Guide
RoyalTek GPS Receiver REB 3000 User Guide
Samsung Computer Drive SH S203N User Guide
Sanyo Car Stereo System CH1822 User Guide
Sanyo Digital Camera VPC S60 User Guide