Sanus Systems Indoor Furnishings EFAV II User Guide

Assembly Instructions for Model: EFAV-II  
Thank you for choosing the Sanus Systems Model EFAV-II. Every effort has  
been made to ensure that your Sanus Systems furniture is perfect. If you have  
questions or feel that there is a problem of any kind, please contact us at  
regarding assembly or missing parts. Replacement parts for Sanus systems  
products purchased through authorized dealers will be shipped directly to you.  
Supplied Parts List: (All threaded fasteners are shown full scale)  
8” Pillar - A  
Qty. 5  
3” Cope Tube - B  
Qty. 4  
Angled Center Support - C  
Qty. 1  
Video Shelf - E  
Qty. 2  
Metal Base - D  
Qty. 1  
Top Bolt - F  
Qty. 5  
Shelf Connector - H  
Qty. 5  
Pan head Bolt - G  
Qty. 5  
Allen Key - K  
Qty. 1  
Wire Bushing - J  
Qty. 4  
Floor Glide - I  
Qty. 5  
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009)  
 
Step 3 - Place a Video Shelf on the Metal Base  
Align four holes in a Video Shelf (E) with the Shelf Connectors (H) threaded into the 3” Cope Tubes (B) in Step 2; then, place  
the Video Shelf onto the 3” Cope Tubes.  
Diagram 3  
H
B
E
H
B
Step 4 - Secure the Angled Center Support to the Video Shelf  
NOTE: Make sure the coped end of the Angled Center Support (C) ts over the Metal Base (D).  
Attach the Angled Center support (C) to the bottom of the Video Shelf (E) by threading a Pan Head Bolt (G) up through the  
Angled Center Support, the Video Shelf, and into an 8” Pillar (A).  
Diagram 4  
A
E
C
G
D
 
Step 5 - Attach 8” Pillars  
By hand, rmly thread an 8” Pillar (A) to the four Shelf Connectors (H) protruding through the Video Shelf (E).  
Diagram 5  
A
H
H
E
D
NOTE  
If you are installing addditional shelves, refer to the Assembly Instructions for Model: EFVS-II.  
Step 6 - Secure Video Shelf to 8” Pillars  
Place the Video Shelf (E) on the 8” Pillars (A); then, using the Allen Key (K) and ve Top Bolts (F), secure the Video Shelf  
to the 8” Pillars.  
Using the same Allen Key (K) tighten the four Pan Head Bolts (G) used to attach the Metal Base (D) to the 3” Cope Tubes  
(B) in Step 2.  
Diagram 6  
F
F
E
F
A
A
A
I
D
I
 
Step 7 - Install Wire Bushings  
Snap the four Wire Bushings (J) into the four holes in the Video shelves (E).  
Diagram 7  
E
J
E
J
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009)  
 

Radio Shack Computer Keyboard 26 762 User Guide
Radio Shack Two Way Radio 21 1848 User Guide
Reliable Iron i38 User Guide
Saeco Coffee Makers Espresso Maker TALEARINGPLUS User Guide
Samsung Home Theater System AH68 01850K User Guide
Samsung MP3 Player YP Z5 User Guide
Sanyo Digital Camera VCC HD3300 User Guide
Sanyo Digital Camera VPC S1070 User Guide
Scotsman Ice Ice Maker NME954 User Guide
Sears Snow Blower 536886531 User Guide