FFMF2A
Thank you for choosing the Sanus Systems FFMF2A flat panel
foundation mount. The Sanus Systems FFMF2A flat panel foundation
mount is designed to support a flat panel monitor weighing up to
31 kg (70 lbs).The lower shelves each support additional equipment
weighing up to 11 kg (25 lbs). Hardware for multiple mounting
configurations is included.
WARNING
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
CAUTION
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
Hardware and procedures for multiple mounting configurations are
included. When you see this symbol, choose the correct configuration to
suit your needs. Not all hardware included will be used.
OPT
Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA • (6901-100126 <07>)
1: Install Pillar on Base
[01]
[02]
[38]
2: Install Brackets on Pillar
[12]
[18]
[14]
[16]
6901-100126 <07>
3: Choose Correct Mounting Plate
75mm x 75mm or 100mm x 100mm
[11]
[11]
75mm
100mm
75mm
100mm
200mm x 200mm
[41]
NOTE
For monitors with 200mm x 200mm hole
spacing, you must remove the existing plate
from the head assembly [11] and replace it
with the larger plate [10].
[11]
[10]
200mm
200mm
6901-100126 <07>
4: Install Head Assembly on Monitor
For Monitors with Flat Back
[30], [31]
[19], [20], [21]
[23], [24], [25]
[11]
For Monitors with a Curved Back or an Obstruction
[32], [33]
[30], [31]
[19], [20], [21]
[26], [27], [28]
[11]
6901-100126 <07>
5: Install Pivot Pin
[15]
[39]
[05]
[29]
[13]
[01]
6: Install Monitor on Pillar
[13]
[40]
[17]
[35]
[34]
[35]
[22]
[40]
6901-100126 <07>
7: Install Shelves
[41]
[37]
[36]
[07]
[03], [04]
8: Install Wire Channel Covers
[06]
[08]
[09]
[09]
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein
covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to
change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this document.
6901-100126 <07>
|